The Air Inflatable Dock Shelter with Treated Wood Frames is designed for wider and taller doorways and loading docks that serve a wide variety of vehicle sizes including vehicles with extended tailgates or hydraulic lifts.
Inflatables
Servicing Louisiana, Florida, North Carolina, Texas, and Georgia
Serco SI300 Inflatable Dock Seal
Design Highlights
- Standard Projection: 12″
- Standard Cover Fabric: 10 oz. Vinyl
- Side & Head Member Backing: 2×8 Pressure Treated Wood
- Standard Head & Side Member Face Width: 12″
- Blower Motor: 1/2 HP, 115v with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch)
- Metal Blower Cover Included
- 24″ High Guide Stripes at Bottom of Side Members
- Front Opening Width is Approx. 7’-6″
Serco SI310 Inflatable Rail Shelter
This Air Inflatable Rail Shelter series is designed for effective sealing of a wide variety of rail loading dock applications. Available in either three-sided or four-sided versions.
Design Highlights
- Standard Projection: Up to 48″
- Standard Cover Fabric: 10 oz. Vinyl
- Side & Head Member Backing: 2 x 12 Pressure Treated Wood
- Blower Motor: 1/2 HP, 115V with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch)
- Metal Blower Cover & Retraction Brackets Included.
- Standard Top, Bottom & Side Member Face Width: 12″
- Standard Air Tube Location 36” in on Top Left
- Rail Shelter Projection is Equal to Distance From the Inside of Near Rail to Building Wall Minus 24″ (field survey) or Centerline of Track to Building
- Wall Minus 54″ (architectural plans)
- Only One of These Projection Calculations is Required
- Approximately 28″ Clearance Required Above Top of Unit for Mounting of Motor Blower & Retraction Bracket System
- 4-Sided Unit Should Be Sized So Bottom Is 24″ Below-dock Level (notify factory if hydraulic rail ramp is present)
Serco SI350 Inflatable Dock Seal
Design Highlights
- Standard Side Member Projection: 14″
- Side Member Face Width: 12″
- Side Member Backing: 2×8 Pressure Treated Wood
- Standard Cover Fabric: 10 oz. Vinyl
- Standard Head Member Projection is 10″ Greater than Side Member Projection
- Front of Header Assembly is 2×8
- Top of Head Frame Has Upward Taper & Requires 2-1/2″ Clearance Above Unit Height (i.e. 11′-8″ high unit requires 11′-10-1/2″ clear at wall).
- Blower Motor: 1/2 HP, 115v with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch)
- Guide Stripes on Head Storage Curtain on 8′-6″ Centers
- Head Member Mounting Flanges Require 2″ Clearance on Either Side
- Head Member Consists Fiberglass Covered Treated Wood Frame Which Supports Integral Torsion Spring-head Bag Assembly (standard head bag drop is 36″ to 48″)
Serco SI400 Inflatable Dock Shelter
Design Highlights
- Standard Side Member Projection: 24″
- Side Member Face Width: 12″
- Side Member Backing: 2×8 Pressure Treated Wood
- Standard Cover Fabric: 10 oz. Vinyl
- Standard Head Member Projection is 10″ Greater than Side Member Projection
- Front of Header Assembly is 2×8
- Top of Head Frame Has Upward Taper & Requires 2-1/2″ Clearance Above Unit Height
- Blower Motor: 1/2 HP, 115v with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch)
- Guide Stripes on Head Storage Curtain on 8′-6″ Centers
- Head Member Mounting Flanges Require 2″ Clearance on Either Side
- Head Member Consists Fiberglass Covered Treated Wood Frame Which Supports Integral Torsion Spring-head Bag Assembly (standard head bag drop is 36″ to 48″)
Serco SI450 Inflatable Dock Shelter
Design Highlights
- Standard Frame Projection: 24″ Side Frame / 34″ Head Frame
- Standard Air Bag Fabric: 10 oz. Vinyl
- Standard Side & Head Storage Curtain Fabric is 22 oz Vinyl & Includes Fiberglass Stays
- Head Storage Curtain Includes Yellow Guide Stripes on 8′-6″ Centers
- Side Curtains Are 16″ Wide; Head Curtain is 26″ High at Peak of Head Frame
- Frames Are Pressure Treated Wood
- Side Frames Are 2 x 4, Head Frame Has 2″ Rake with
- 2 x 10 Front & 2 x 6 Back
- Standard Head Bag Drop is 36″, 42″ or 48″ From Underside of Head Frame.
- Standard Front Opening Width is 7′-6″
- Steel Supports Project 5″ Greater than Side Frame Projection
- Includes Foam Filled Draft Pads in Bottom Corner
- Blower Motor: 1/2 HP, 115V with Automatic Reset Thermal Overload Protection (includes NEMA 1 switch)
