Commercial Rolling Steel Doors

You are here:

Servicing Louisiana, Florida, North Carolina, Texas, and Georgia

Not all products are available in all areas. Please contact your local sales representative for more information.

Zap Operator Model 825

"Our Proof that Size doesn't Matter"
  • Simple lightweight installation
  • Requires single phase supply only
  • Operates without limit switches
  • High torque variable speed and soft stop
  • Smooth and quiet operation
  • Stop and re-open without a safety edge
  • Safety control from Photocells etc
  • Adjustable auto-close timer
  • Will operate during a power failure with optional battery back up
  • Traffic light control and dock leveler interlock optional interface
  • Optional plug-in remote control receiver
  • Field proven and time tested
  • Approved for commercial use: CSA/UL325. CE.
  • 825 range doors up to 170 sq ft
  • 16 sq Mtrs

Zap DC Motor Drives

Operates overhead, profile, or vertical sliding sectional doors. Requires only a single phase 3.5 amp power supply (6 amps with lighting).

Sensitive Obstruction Detection

Door can be stopped without a safety edge, by hand pressure. The door will stop and reopen if obstructed during the close cycle. The door will stop if obstructed during the open cycle.

Manual Over-Ride

Manual over-ride release easily enables disengagement of the drive, to allow the door to be moved by hand.

Zap Controller

The control unit provides fast, variable speed operation with a self calibrating speed change point before each limit of travel and also provides a soft stop. The system operates without limit switches, as the controller monitors motor current and stops the door at the limit of travel. The door will stop and reopen if obstructed during the close cycle and will stop if obstructed during the open cycle. This fast reacting obstruction sensing system avoids cables jumping the drums. The controller will automatically stop the motor on sensing a slide lock left in a locked position without the use of an interlock switch. The controller incorporates an adjustable auto-close timer and full safety control from photocells.

Optional Remote Control Receiver, Auto-Lock, Traffic Light Controller and Dock Leveler interface are also available

Wayne Dalton - FireStar 700 Rolling Steel Fire Door

Wayne-Dalton FireStar™ Rolling Steel Fire Doors provide a practical and innovative solution to safety and fire protection. FireStar doors can be drop-tested and reset at any time by anyone, such as a facility manager or maintenance supervisor, thanks to a standard auto-reset feature.

The FireStar door features a forward-thinking design that outperforms industry standard fire doors in all areas, including auto-reset testing capability; smooth, quiet operation; and reliable, long-lasting performance.

FireStar rolling steel fire doors are a simple and innovative solution for your safety and fire protection needs. Critical elements necessary in the reliable function of fire doors are incorporated as standard features with FireStar’s revolutionary design.

Features
  • Easy testing and floor resettable
  • Non-tension release
  • Innovative planetary gear design approved and tested for a minimum of 20,000 cycles
  • Preassembled drop-out mechanism
  • Viscous governor technology
  • Single fusible link cable routing
  • Standardized component design for all door sizes
  • Chain hoist, lift up, crank, or motor operated
  • Available with left-hand or right-hand operation
  • UL / FM approved
Safety

The FireStar door can be drop tested easily and reset in a matter of seconds at any time; no tools or service technicians are required. Please note that this can be done in addition to the door’s required annual inspection by a trained door systems technician. By self-testing throughout the year, facility personnel can be even more confident that their door will function safely in the event of fire.

The drop-out mechanism is designed to eliminate down time during drop testing while the viscous governor technology results in smoother, quieter door operation.

Reliability

FireStar’s revolutionary design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance.

Factory tested and approved for a minimum of 20,000 cycles, the FireStar door can be used and tested on a regular basis without concerns of premature failure.

FireStar fire doors have been tested and approved to meet the requirements of well known agencies, such as Underwriters Laboratories and Factory Mutual, and conform to NFPA Standard 80.

Simplicity

Wayne-Dalton incorporates one standardized component design for all FireStar doors regardless of size, and utilizes fewer parts than other models. This helps to ensure more accurate installations and reduces the possibility of potential service calls in the future. And as an added benefit, eliminating one of the fusible link cables helps the door and surrounding area look cleaner and less cluttered. It also reduces the risk of cable interference with other nearby fixtures.

Wayne Dalton - Model 600 Rolling Grille

Wayne-Dalton Rolling Grilles offer total security, visibility, and ventilation in a number of patterns and finishes for commercial, industrial, retail, and institutional applications. These grilles are available in steel, aluminum, or stainless steel to meet any need.

Wayne-Dalton Rolling Grilles are designed to maximize security, visibility, and ventilation. The durable construction technique used ensures that the grilles will offer many years of reliable and consistent performance.

Materials & Construction

Standard features include 5/16” galvanized steel horizontal rods, continuous from jamb to jamb, and covered with aluminum tubes. Vertical links are aluminum. End links ensure that the grille cannot be pulled from guides. The bottom bar is a tubular aluminum extrusion, fitted with nylon end caps which act as bearing surfaces.

Optional cylinder lock assembly in bottom bar activates concealed 3/8” steel tamperproof lock rods. Lock uses standard mortise cylinder, and is also available with an optional removable core. Center locks available up to 25′ wide.

Aluminum grille patterns are available in clear, mill, or bronze anodized finishes. Optional materials are #304 finished stainless steel and galvanized steel.

Powder coating is available in 180 colors. Powder coating is a dry finishing process in which finely ground particles of pigment and resin are electrostatically charged and sprayed onto the electrically grounded parts of rolling doors.These charged particles adhere to the rolling door parts until they melt and fuse into a solid coating in a curing oven. The result is a finish that radiates beauty and smoothness for an aesthetically pleasing grille.

Operation can be manual push-up, chain, crank, or motor-operated. Door mounting can be self-supporting, using structural tubes, or directly to the building structure.

Counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033″ per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper counterbalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsional load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

Optional hood cover encloses curtain coil and counterbalance mechanism and is made to match the grille finish.

Wayne Dalton - FireStar 700C Insulated Rolling Steel Fire Door

The Wayne-Dalton FireStar Insulated Rolling Steel Fire Door is the innovative solution to safety and fire protection while maintaining thermal integrity.

The 700C Series FireStar door features fire-resistant insulation, making it the ideal choice for exterior openings that require fire doors. Of course, the 700C offers all the features that make the FireStar the most innovative fire door in the industry, including the ability to drop-test and automatically reset the door by anyone without a service call.

FireStar doors also feature forward-thinking designs that outperform other fire doors with reliable, long-lasting performance with smooth, quiet operation.

Features
  • Easy testing and floor resettable
  • Non-tension release
  • Innovative planetary gear design approved and tested for a minimum of 20,000 cycles
  • Preassembled drop-out mechanism
  • Viscous governor technology
  • Single fusible link cable routing
  • Standardized component design for all door sizes
  • Chain hoist, crank, or motor operated
  • Available with left-hand or right-hand operation
  • UL / FM approved
Safety

The FireStar door can be drop tested easily and reset in seconds; no tools or service technicians required. These tests can be done in addition to the required annual inspection by a trained technician. By self-testing throughout the year, you can be even more confident that the door will function safely in the event of fire.

The drop-out mechanism is designed to eliminate down time during drop testing while the viscous governor technology results in smoother, quieter door operation.

Reliability

FireStar’s revolutionary design uses a patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance. Factory tested and approved for a minimum of 20,000 cycles, the FireStar door can be used and/or tested on a regular basis.

FireStar fire doors have been tested and approved to meet the requirements of well known agencies, such as Underwriters Laboratories and Factory Mutual, and conform to NFPA Standard 80.

Simplicity

Wayne-Dalton incorporates one standardized component design for all FireStar doors regardless of size, and utilizes fewer parts than other models.This helps to ensure more accurate installations and reduces the possibility of potential service calls in the future.

As an added benefit, eliminating one of the fusible link cables helps the door and surrounding area look cleaner and less cluttered. It also reduces the risk of cable interference with other nearby fixtures.

Wayne Dalton – Model 800 Rolling Steel Service Door

The Wayne-Dalton 800 Series rolling service door is designed to meet the tough requirements of virtually any commercial or industrial application. The 800 Series offers flexibility in substrate materials with choices of galvanized or prime steel, stainless steel, or aluminum.

Color options range from our standard five factory finish colors to a full range of 180 RAL powder coat choices.

Popular in both interior and exterior applications, the Wayne-Dalton 800 Series rolling service door features a galvanized, pre-painted curtain of minimum 22-gauge steel. The 800 Series doors have a standard windload rating of 20 PSF. An optional windload rating of up to 55 PSF is available to cover your Florida and Dade County windload requirements.

Materials and Construction

Wayne-Dalton’s 800 Series rolling doors are composed of curved or flat-faced slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 800 Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal, and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.

Counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033″ per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper counterbalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsion load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood covers the curtain coil and counterbalance mechanism. Slat hoods are available on blue, brown, beige, and white doors.

Wayne Dalton - Model 800C Thermotite Rolling Steel Service Door

The Wayne-Dalton 800C Series rolling service door is designed to meet the tough requirements of virtually any commercial or industrial application with the added advantage of energy efficiency. The 800C Series offers flexibility in substrate materials with choices of galvanized or prime steel, stainless steel, or aluminum.

Color options range from our standard five factory finish colors to a full range of 180 RAL powder coat choices. Polyurethane insulation in each slat promotes energy savings and building comfort.

Popular in both interior and exterior applications, the Wayne-Dalton 800C Series insulated rolling service door features a galvanized, pre-painted curtain of minimum 22-gauge steel. 800C Series doors are wind load rated at 20 PSF. An optional wind load rating of up to 55 PSF is available to cover your Florida and Dade County windload requirements.

Materials and Construction

Wayne-Dalton’s 800C Series rolling doors are composed of flat slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 800C Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal, and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.

Counterbalance assembly consists of a spring barrel which serves as load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033″ per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper counterbalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsion load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood cover encloses the curtain coil and counterbalance mechanism. Slat hoods are available on blue, brown, beige, and white doors.

Wayne Dalton - Model 900 Rolling Steel Service Door

The Wayne-Dalton 900 Series rolling service door is ideal for jobs where an economical solution for durability and strength is needed. The 900 Series offers flexibility in substrate materials with choices of 24, 22, or 20–gauge galvanized steel, stainless steel, or aluminum.

Color options range from our five standard factory-finish colors to a full range of 180 RAL powder coat choices.

Popular in both interior and exterior applications, the Wayne-Dalton 900 Series rolling service door features a galvanized, pre-painted curtain of minimum 24-gauge steel. All 900 series doors are standard wind load rated with a minimum of 20 PSF.

Materials and Construction

Wayne-Dalton’s 900 Series rolling doors are composed of curved or flat-faced slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 900 Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation.

The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033″ per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper counterbalance. Oil-tempered, torsion-type counterbalance springs are wound from heat-treated steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsional load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood cover encloses the curtain coil and counterbal ance mechanism. Slat hoods are available in blue, brown, beige, and white doors.

Wayne Dalton - Model 926 Rolling Steel Service Door

The Model 926 rolling steel service door provides an economical yet durable solution for self-storage to industrial openings. Yet it does not sacrifice on essential features and benefits needed in such applications.

Materials and Constructions

Wayne-Dalton’s 926 Series rolling doors are composed of flat-faced slats that provide a natural water-shed, helping to reduce corrosion. The slats are designed with free-acting interlocking joints that permit easy articulation when the door coils.

The 926 Series features a strong double-angle bottom bar that reinforces the lower edge of the curtain against wind pressure and permits varied lock, astragal and safety edge options. This bottom bar is designed for easy installation and does not require fasteners protruding into the guide openings, so the bottom bar does not interfere with door operation. Zinc plated, cast iron windlocks add strength and prevent lateral slat movement.

The counterbalance assembly consists of a spring barrel which serves as a load-carrying beam. It encases the counterbalance mechanism and provides the axis around which the curtain coils. (Deflection is limited to 0.033″ per lineal foot of span.) If required, barrel rings of malleable iron or stamped steel may be provided to assure proper counterbalance. Oil-tempered, torsion-type counterbalance springs are wound from ASTM A229 steel, providing accuracy in balancing the door. Barrel plugs connect ends of springs to barrel and tension rod. Tension rod of steel shafting holds fixed ends of springs and carries torsional load of spring counterbalance.

Spring tension adjusting wheel is normally mounted outside the bracket on end of tension rod. Inside adjusting wheel for tight side-room applications is available in limited sizes.

The hood cover encloses the curtain coil and counterbalance mechanism. Slat hoods are available.

Wayne Dalton - Model DS100 Rolling Sheet Door

A Strong, Smooth-Working Door with Interior or Exterior or Exterior Locking

Mini-storage buildings, loading docks and service buildings benefit from the versatility, sturdy construction, easy operation and long service life of DS-100 doors.

DS-100 roll-up doors are available in round or square profiles. The continuous curtains are made from hot-dipped galvanized steel, and then finished with silicone polyester paint for beauty and durability. Installation to masonry, steel or wood jambs is quick, and simple — no special preparation, no overhead tracks.

Steel slide-bolt assemblies at each bottom corner secure the closed door from inside. For added security, the slide-bolts also accept padlocks. Available exterior mini curtain lock accepts two shackle locks: one for storage tenant security, the other for building owner risk-protection.

DS-100 Light Commercial Roll-Up Doors are available in sizes to 10′ x 10′, and a variety of standard and special colors. You get the doors you need with timely delivery and attractive pricing. Write, call or fax us for specifying/ordering information.

Wayne Dalton - Secur-Vent Ventilated Rolling Steel Service Door

Secur-Vent® doors are used for exterior and interior commercial applications, providing the maximum in security with rugged construction, ventilation, and visibility.

Wayne Dalton - Titan Rolling Steel Service Door

Rolling Doors to Handle your Biggest Jobs

Constructed from 6 tall curved slats which are formed from 18- gauge or 14- gauge commercial quality steel, it can stand up to severe abuse and provide the highest degree of security for critical requirements. It provides the most windload resistance for any specification, and is available with heavy duty articulating windlocks to permit door operation during high wind speed events.